0812-8222-8891 Spectrum Analyzer ATTEN AT6010 Spectrum Analyzer 150 KHz to 1G Hz, harga Spectrum Analyzer ATTEN AT6010 murah di jakarta indonesia

ATTEN AT6010/ AT-6010 Spectrum Analyzer 150 KHz to 1G Hz Product Description: AT6011 Spectrum Analyzer is a low cost, high performance digital synthesized RF measurement instrument with Tracking Generator and frequency up to 1GHz. It uses VCO phase locked technique. It is rugged and easy to control operating panel. It’ s the most stable Spectrum Analyzer you can find with good noise floor performance. AT6000 Series spectrum analyzer have exceed 1GHZ frequency ( 0.15 ~ 1050MHZ) 50MHZ step frequency and fine adjust to the center frequency, compose the convenient frequency-domain test. AT6011 have the tracking signal generator. Features: • Frequency Range: 150KHz to 1050MHz • 4½ Digit Display: Centre & Marker Frequency, • 0.1MHz Resolution • Amplitude Range: -100dBm to + 13dBm • Filters: 20KHz, 250KHz & Video Filter. • Output Power: + 1dBm to -50dBm ( 50 ohms) • Built-in Tracking Generator: 0.15MHz to 1050MHz ( Only for Model AT5011+ ) Models: • AT6010 1GHz Standard Model • AT6011 1GHz with Tracking Generator Technical Specifications: Frequency range: 0.15 to 1050MHz CF adjust range: 0~ 1050MHz Resolution of frequency display: 10kHz RBW: 400kHz and 20kHz Video filter bandwidth: 4kHz Average noise level: -90dBm ( 20kHz Bandwidth) Amplitude range: -100dBm to + 10dBm Sweep rate :   40Hz Reference level: -30dBm to + 10dBm Frequency generator : TCXO DDS Input attenuator accuracy : + / -1dB/ 10dB Signal input connector : N type Stability : + / -5ppm/ year Aging : + / -1ppm/ year Accuracy : + / -10kHz Display : CRT 8x10 Div Third order intermod : -90dBc ( two signals > 3MHz apart) Scan width : 100kHz/ div~ 100MHz/ div, 1-2-5 steps and 0 step Log scale fidelity : + / -2dB ( CF: 500MHz 10dBm attn zero scan RBW : 400kHz ) 500MHz AT6011+ Tracking Generator Specifications: • Output: N connector • Output Impedance: 50ou • Frequency range: 0.15MHz~ 1050MHz • Output level range: -50dBm~ + 0dBm ( in 10dB steps and var) • Frequency response: ± 2dB • Output attenuator: 0~ 40dBm ( 4* 10dB)