0812-8222-8891 Spectrum Analyzer Digital AT5010D 1GHz Digital Spectrum Analyzer murah di jakarta

AT5010D/ AT-5010D 1GHz Digital Spectrum Analyzer Product Overview This instrument can be used to test the spectrum component of electrical signal with a frequency range waves from 0.15 to 1050MHz, and the signal tested and its composition must be periodical. As to the oscilloscope working under Yt mode that shows range in time domain while the spectrum analyzer is the display of range on frequency domain ( Yf) . Every spectrum component of one signal can be observed by spectrum analyzer while the same signal on the oscilloscope can be shown as one wave shape. Spectrum analyzer is actually a super heterodyne sweep-frequency receiver of 3 frequency conversion. The signal tested ( f input = 0.15 ~ 1050MHz) is arranged to the first mixer where the signal mixes with a signal voltage transmitted from voltage controlled oscillator ( f local oscillator = 1350~ 2350MHz) which is called the first local oscillator. The deviation between the oscillator and input frequency ( f local - f input= the first medium frequency) is the first medium frequency, which goes into the amplifier through tuning the band pass filter on 350MHz, and then pass 2nd mixer and amplifier. The second medium frequency is 35MHz while the third medium frequency is 2.875MHz. In the third medium frequency, the oscillator passes through one band pass filter of 400 KHz or 20 KHz selectively before getting to the amplitude demodulator. All the controlling methods can be realized inside RMA chip. Technical specifications Spectrum analyzer is actually a super heterodyne sweep-frequency receiver of 3 frequency conversion. The signal tested ( f input = 0.15 ~ 1050MHz) is arranged to the first mixer where the signal mixes with a signal voltage transmitted from voltage controlled oscillator ( f local oscillator = 1350~ 2350MHz) which is called the first local oscillator. You can order based on the product type. Frequency Frequency Range: 0.15~ 1050MHz Stability: 10ppm/ Year Aging: 2ppm/ Year Frequency Display Resolution: 10kHz Reading accuracy: 2% * Sweep span + 5* 10-3* center frequency+ 10kHz Adjusting range of center frequency: 0.15^ 1050MHz Frequency generating: TCXO, DDS( digital frequency compound) Sweep span range: 0 level and 1^ 1000MHz Range of marked frequency: 150 KHz, auto set, auto catch and auto track. Resolution bandwidth: 400kHz
20kHz Video filter bandwidth: 4kHz Sweep frequency: 20ms Input Signal input: connector BNC ( F) Impedance: 50 Max durative RF input level: + 10 dBm 0.1W Max DC input voltage: 25V Power to the probe AZ530: 6 VDC Audio frequency output: 3.5mm , transmitter connector FM Scrolling-control input: center frequency, controlled by FLY MORE Key Scope Scope range: + 13dBm ~ -100dBm Display: 7.0 inch color TFT LCD Display calibration: 10dB/ div logarithm Display range: 80dB( 10 dB/ div) Frequency vibration of scope: 0 level, resolution bandwidth 400kHz 4 dBm Reference calibration signal: 50MHz -27dBm Input attenuator: 0^ 50dB( 5* 10dB) Accuracy ( input attenuation) : d 1.5dB Standard reference level: -27 dBm 1.5 dBm
500MHz Accuracy ( reference level) : 500MHz( CF) , 0 level, RBW400KHz: 2dB Min average noise: d-90 dBm( RBW20kHz VBW4kHz) Adjustment of three steps: 2 signals at -27dBm,  3MHzalternation: d-60 dBc Second harmonics contain: -27 dBm, 0 dBattenuation, d-50 dBc VSWR ( attenuatione10 dB) : typ. 1.5 : 1 Features High performance digital synthesis design Broadband frequency range Broadband dynamic range Mobile communication testing function 7-inch TFT LCD